Microsemi's IGLOO nano Starter Kit provides a simple board with Microsemi's IGLOO nano AGLN250 device in the VQG100 package、Libero System on Chip (SoC)、 and a low-cost programming stick (LCPS) for in-system programming. The IGLOO nano Starter Kit is fully RoHS-compliant and enables you to quickly evaluate Microsemi's IGLOO family and prototype your design. The following key functions are supported:
●Detailed current monitoring capabilities of the industry's lowest power FPGAs
●Development with Microsemi's Flash*Freeze technology
●Easy experimentation with ISP、device serialization、and FlashLock on-chip system security
●USB-to-UART interface for HyperTerminal on PC connected to board
●On-board voltage regulation、enabling independent I/O bank voltages
Since IGLOO nano devices are footprint-compatible with ProASIC3 nano devices、this kit can also be used to prototype designs for ProASIC3 nano、as well as the low-power leader of IGLOO nano.
| Quantity | Description |
|---|
| 1 | IGLOO nano evaluation board with AGLN250V2-VQG100 |
| 1 | Low-cost programming stick |
| 2 | USB 2.0 high-speed cables |
| 1 | Quickstart Card |
Development board with an IGLOO AGLN250-VQG100 device ●Low-cost AGLN250-VQG100 device
●USB-to-UART connection for HyperTerminal on a PC
●Clocks: A 20 MHz system clock is provided using a low-power、precision oscillator.
●Eight LEDs and four switches provide simple inputs and outputs to the system.
●All I/Os available for quick connection to external circuitry
●Ability to switch VCORE from 1.2 V to 1.5 V
●Full current measurement capability of independent I/O banks and VCC for accurate power analysis
●Optional board power connector for an external supply、but none is needed when connected to a USB cable
●Includes best-in-class FPGA tools from industry leaders
●All components used on the board are low-power components、including LEDs (2 mA)、resets ( µA range)、and oscillator (2-3 mA).
