Raspberry Pi Sense HAT - Make your own Astro-Pi【101990078】 ※在庫限り品

Raspberry Pi Sense HAT - Make your own Astro-Pi【101990078】 ※在庫限り品

メーカー名:
型番:
101990078
品質ランク:
M1

Raspberry Pi Sense HAT - Make your own Astro-Pi【101990078】の概要

Raspberry Pi用の拡張ボード(Arduinoのシールドに相当)でGPIOソケットに差し込んで使います。温度、湿度、圧力、加速度、3Dジャイロ、地磁気センサーと8×8のLEDマトリックス表示器が実装されています。

Make your Raspberry Pi into an Astro Pi with the Sense HAT - Pressure、 humidity、 temperature and orientation sensors combined with a beautiful 8x8 LED matrix!

Attach the HAT to your Pi's GPIO pins and you can use the integrated circuit based sensors for many different types of experiments、 applications、 and even games.

The sensors enable you to read:
    Orientation (yaw、 pitch & roll) via an accelerometer、 3D gyroscope and magnetometer
    Pressure
    Humidity
    Temperature

The Sense HAT supports a whole host of projects for the Raspberry Pi、 it can measure how fast is the Pi itself travelling (i.e. measure your speed)、 how hot is it how humid is it (air humidity)、 which direction is the Raspberry Pi facing

The LED Matrix enables you to display the data from the various sensors、 it can show you which way is geomagnetic North by programming a compass using the magnetometer、 or simply be used to play games like Tetris、 Pong and Snake with the joystick. The joystick can also be used to enable a human user to interact with the programs running on the Raspberry Pi Sense HAT.

Writing programs for the Sense HAT is very simple、 with a Python library available to get started quickly and easily. For a truly out of world projects check out the AstroPi website http://astro-pi.org/、 containing a host of ideas and instructions for using the Raspberry Pi and Sense HAT on the International Space Station (ISS).
This kit comes with the Sense HAT、 4x M2.5 mounting posts and 8x M2.5 screws to securely mount your Sense HAT on your Raspberry Pi.

Getting Started:
Connect your Sense HAT to the Raspberry Pi via the 40 GPIO Pins.You will then need to install the software:
Open up a terminal and run the following command:
wget -O - http://www.raspberrypi.org/files/astro-pi/astro-pi-install.sh --no-check-certificate | bash
(This will take approximately 5 mins to run on the Raspberry Pi 2 Model B、 and approximately 20 minutes on earlier models of the Raspberry Pi)
When the install has finished you will need to reboot your Raspberry Pi

Features:
    Gyroscope angular rate sensor: +/-245/500/2000dps
    Accelerometer - Linear acceleration sensor: +/-2/4/8/16 g
    Magnetometer - Magnetic Sensor: +/- 4/8/12/16 gauss
    Barometer: 260 1260 hPa absolute range (accuracy depends on the temperature and pressure、 +/- 0.1 hPa under normal conditions)
    Temperature sensor (Temperature accurate to +/- 2 degC in the 0-65 degC range)
    Relative Humidity sensor (accurate to +/- 4.5% in the 20-80%rH range、 accurate to +/- 0.5 degC in 15-40 degC range)
    8x8 LED matrix display
    Small 5 button joystick

Part List:
    1 x Sense HAT

※掲載されている価格には消費税、各種手数料が含まれておりません。別途消費税およびお支払方法に応じた手数料が必要になります。

※このホームページに掲載されている、記事・写真の一部または全部をそのまま、または改変して利用・転載・転用することを禁じます。

※商品によって販売価格が店頭価格と異なる場合がございます。

※弊社ではお客様が商品を選びやすくするためにデータシートの提供や技術情報、商品画像の表示を行っています。
しかしさまざまな事情により、これらの情報がすべて正確であることを弊社が保証することはできません。
商品の正確な仕様等は各メーカーの最新のデータシートで確認して頂きますようお願いいたします。
また、商品画像につきましても、当アイテムとは異なるイメージ画像を表示している場合がございます。
ご注文の際はくれぐれもご注意願います。また、注文間違いの返品交換は応じかねますのであらかじめご了承下さい。

  • マルツの新提案 プロトファクトリー
  • マルツの新提案 プロトファクトリー
  • マルツの新提案 プロトファクトリー
DigiReelの説明
Page Top

【標準梱包形態】

標準の梱包は、Digi-Keyがメーカーから受け取る最小の梱包サイズです。 Digi-Keyの付加価値サービスにより、最小注文数は、メーカーの標準パッケージより少なくなっている場合があります。 梱包形態(リール、チューブ、トレイなど)は、製品を少量梱包に分割する際に変更される場合がありますので、ご了承ください。

【梱包形態】

テープ&リール

テープ&リールは、メーカーから受け取った未修正の連続テープのリールです。 リーダおよびトレーラとしてそれぞれ知られている最初と最後の空のテープの長さは、自動組立装置の使用を可能にします。 テープは、米電子工業会(EIA)規格に従いプラスチックリールに巻き取られます。 リールサイズ、ピッチ、数量、方向およびその他詳細情報は通常、部品のデータシートの終わりの部分に記載されています。 リールは、メーカーによって決定されたESD(静電気放電)およびMSL(湿度感度レベル)保護要件に従って梱包されます。

カットテープ

カットテープは、ご注文部品の数量を正確に含むリール(上記)から切断された長さのテープです。 カットテープにはリーダーやトレーラーが含まれていないため、多くの自動組立機械には適していません。 テープは、メーカーによって決定されたESD(静電気放電)およびMSL(湿度感度レベル)保護要件に従って梱包されます。

Digi-Reel®

Digi-Reel®はお客様のご要望の数量を連続テープでリールに巻いて販売するものです。Digi-ReelはEIA(米国電子工業会)規格に準拠し、テープには18インチ(約46cm)のリーダーとトレイラーを付けてプラスティックリールに巻いて販売いたします。Digi-Reelはお客様からご注文を頂いてから作成されますが、対応している製品のほとんどは当該製品の在庫から作成され即日出荷されます。在庫不足等の理由で出荷が遅れる場合は、お客様に別途ご連絡を致します。
リール1巻きについて「リーリング手数料」が加算され価格に含まれています。