Tenergy T4s Intelligent Universal Charger - 4-Bay【TOL-14457】

Tenergy T4s Intelligent Universal Charger - 4-Bay【TOL-14457】

メーカー名:
型番:
TOL-14457
環境区分:
RoHS対応
品質ランク:
M1
数量

納期:
30日程度

提携先の在庫状況や休日の関係で、
上記の通り出荷できない場合がございます

1個以上
¥6,402.00
(税込¥7,042.00)
20個以上
¥6,082.00
(税込¥6,690.00)
50個以上
¥5,762.00
(税込¥6,338.00)

こちらからもご購入いただけます

バルク
販売終了

Tenergy T4s Intelligent Universal Charger - 4-Bay【TOL-14457】の概要

●Description

The 4-Bay T4s Intelligent Universal Charger from Tenergy is an automatic smart charger compatible with almost all types of rechargeable batteries, thereby eliminating the need to own multiple chargers. Capable of automatically identifying and charging Lithium Ion (Li-ion), LiFePO4, NiMH and NiCD rechargeable batteries, the T4s applies the appropriate charging mode, whether it be a constant charge current (CC), constant charge voltage (CV) or trickle charge. The T4s is able to independently charge your desired battery, thanks to its four microcomputer-controlled charging slots, allowing you to get power back into your project or device quickly and easily!

The T4s Intelligent Universal Charger possesses an output voltage of 4.2V, 3.6V or 1.48V, depending on your charging mode, with an output current of either 425mA charging four batteries at once or 850mA charging two. There shouldn't be much of an issue charging your desired battery since the T4s can charge AA, AAA, C and Sub-C size NiMH/NiCD batteries, as well as 26650, 22650, 18650, 17670, 18490, 17500, 17335, 16340 (RCR123), 14500 and 10440 Li-ion/LiFePO4 batteries. Additionally, this charger also features an easy-to-decipher LED charging status indicator to help you know exactly when your batteries are fully charged!

Note: When charging LiFePO4 batteries, select LiFePO4 battery type on the switch at the top of the unit.

●Features

・Maximum Discharge Current: 425mA x4 & 850mA x2
・Standard Discharge: DC 4.2V, 3.6V, 1.48V
・Compatible Chemistry: Li-ion/LiFePO4/NiMH/NiCD
・Input Voltage: AC 100--240V 50/60Hz or DC 12V
・Capable of charging 4 batteries simultaneously
・Each of the four battery slots monitors and charges independently
・Automatically identifies Li-ion, NiMH and NiCD rechargeable batteries
・Three Charging Modes: CC, CV and Trickle Charge
・Automatically detects battery status and selects the appropriate voltage and charge mode
・3 LED lights display charging progress for each battery
・Automatically stops charging when complete
・Reverse polarity protection
・Designed for optimal heat dissipation

在庫状況:営業所に在庫はございません。

マルツ全店でオンライン注文&店頭受取りサービスをご利用いただけます。

充電器にはこちらの製品もございます。

充電器(鉛蓄電池・バッテリー) 充電器(乾電池)

※掲載されている価格には消費税、各種手数料が含まれておりません。別途消費税およびお支払方法に応じた手数料が必要になります。

※このホームページに掲載されている、記事・写真の一部または全部をそのまま、または改変して利用・転載・転用することを禁じます。

※商品によって販売価格が店頭価格と異なる場合がございます。

※弊社ではお客様が商品を選びやすくするためにデータシートの提供や技術情報、商品画像の表示を行っています。
しかしさまざまな事情により、これらの情報がすべて正確であることを弊社が保証することはできません。
商品の正確な仕様等は各メーカーの最新のデータシートで確認して頂きますようお願いいたします。
また、商品画像につきましても、当アイテムとは異なるイメージ画像を表示している場合がございます。
ご注文の際はくれぐれもご注意願います。また、注文間違いの返品交換は応じかねますのであらかじめご了承下さい。

  • マルツの新提案 プロトファクトリー
  • マルツの新提案 プロトファクトリー
  • マルツの新提案 プロトファクトリー
DigiReelの説明
Page Top

【標準梱包形態】

標準の梱包は、Digi-Keyがメーカーから受け取る最小の梱包サイズです。 Digi-Keyの付加価値サービスにより、最小注文数は、メーカーの標準パッケージより少なくなっている場合があります。 梱包形態(リール、チューブ、トレイなど)は、製品を少量梱包に分割する際に変更される場合がありますので、ご了承ください。

【梱包形態】

テープ&リール

テープ&リールは、メーカーから受け取った未修正の連続テープのリールです。 リーダおよびトレーラとしてそれぞれ知られている最初と最後の空のテープの長さは、自動組立装置の使用を可能にします。 テープは、米電子工業会(EIA)規格に従いプラスチックリールに巻き取られます。 リールサイズ、ピッチ、数量、方向およびその他詳細情報は通常、部品のデータシートの終わりの部分に記載されています。 リールは、メーカーによって決定されたESD(静電気放電)およびMSL(湿度感度レベル)保護要件に従って梱包されます。

カットテープ

カットテープは、ご注文部品の数量を正確に含むリール(上記)から切断された長さのテープです。 カットテープにはリーダーやトレーラーが含まれていないため、多くの自動組立機械には適していません。 テープは、メーカーによって決定されたESD(静電気放電)およびMSL(湿度感度レベル)保護要件に従って梱包されます。

Digi-Reel®

Digi-Reel®はお客様のご要望の数量を連続テープでリールに巻いて販売するものです。Digi-ReelはEIA(米国電子工業会)規格に準拠し、テープには18インチ(約46cm)のリーダーとトレイラーを付けてプラスティックリールに巻いて販売いたします。Digi-Reelはお客様からご注文を頂いてから作成されますが、対応している製品のほとんどは当該製品の在庫から作成され即日出荷されます。在庫不足等の理由で出荷が遅れる場合は、お客様に別途ご連絡を致します。
リール1巻きについて「リーリング手数料」が加算され価格に含まれています。