DESCRIPTION

While A10/A20-cubieboard very suitable for student, software/hardware hackers, A20-cubietruck is suitable for us to make real product.

Cubietruck is the 3rd board of Cubieteam, we also name it Cubieboard3. It's a new PCB model adopted with Allwinner A20 main chip, the same with Cubieboard2. But it is enhanced with some features, such as 2GB memory, VGA display interface on-board, 1000M NIC, WIFI+BT on-board, support Li-battery and RTC, SPDIF audio interface.

FEATURES

･ Allwinner Tech A20 SOC
･ SATA supported
･ 54 extended pins
･ Built-in HDMI/ VGA display interface
･ Built-in WIFI+BT module
･ 2GB DDR3 RAM
･ Built-in IR receiver
･ SPDIF audio interface

SPECIFICATION

･ Allwinner Tech SOC A20 ARM Cortex -A7 Dual-Core ARM Mali400 MP2 Complies with OpenGL ES 2.0/1.1
･ 2GB DDR3@480MHz
･ HDMI&VGA 1080P display output on-board
･ 10M/100M/1G Ethernet
･ WIFI + BT wireless connection with antenna on-board
･ SATA 2.0 interface support 2.5’ HDD (for 3.5" HDD, only need another 12V power input)
･ Storage solution NAND + MicroSD
･ 2 x USB HOST, 1 x OTG, 1 x SPDIF, 1 x IR, 4 x LEDs, 1 x Headphone, 3 x Keys
･ Power DC5V@2.5A with HDD support Li-battery & RTC
･ 54 extended pins including I2S, I2C, SPI, CVBS, LRADC x2,UART, PS2, PWM x2, TS/CSI, IRDA, ･ LINEIN&FMIN&MICIN, TVIN x4 with 2.0 pitch connectors
･ PCB size 11cm *8cm*1.4mm
･ Operating temperature: -10℃ ~ 70℃.

PART LIST

･ Cubietruck main board x1
･ SATA 2.0 cable x1
･ Mini USB to OTG x1
･ Mini USB cable x1
･ USB to 1.7 mm DC jack cable x1
･ Acrylic shell x1
･ Ultrathin Heat Sink x1