Xilinx Spartan-3Eを搭載した評価ボードです。
搭載IC | Xilinx Spartan 3-E FPGA、100K gates |
---|
The Basys 2 FPGA development board is a circuit design and implementation platform for beginners to gain experience building real digital circuits. Built around a Xilinx Spartan-3E FPGA and an Atmel® AT90USB2 USB controller、 the Basys 2 development board provides complete、 ready-to-use hardware suitable for hosting circuits ranging from basic logic devices to complex controllers. A large collection of on-board I/O devices and all required FPGA support circuits are included、 so countless designs can be created without the need for any other components.
Four standard expansion connectors allow designs to grow beyond the Basys 2 board using breadboards、 user-designed circuit boards、 or Pmods (Pmods are inexpensive analog and digital I/O modules that offer A/D & D/A conversion、 motor drivers、 sensor inputs、 and many other features). Signals on the 6-pin connectors are protected against ESD damage and short-circuits、 ensuring a long operating life in any environment. The Basys 2 board works seamlessly with all versions of the Xilinx ISE tools、 including the free WebPACK. It ships with a USB cable that provides power and a programming interface、 so no other power supplies or programming cables are required.
Connector(s):
・USB port
・Four 6-pin Pmod connectors
・VGA
・PS/2
Features:
・Xilinx Spartan 3E FPGA、 100K gates
・Linear Technology
・Atmel
・FPGA features 18-bit multipliers
・72 Kbits of fast dual-port block RAM
・500 MHz+ operation
・Requires Adept 2.0 or later for operation
・XCF02 Platform Flash ROM that stores FPGA configurations indefinitely
・User-settable oscillator frequency (25、 50、 and 100 MHz)、 plus socket for a second oscillator
・Three on-board voltage regulators (1.2V、 2.5V、 and 3.3V) that allow use of 3.5V-5.5V external supplies
・Ships with a USB cable that provides power and a programming interface
・8 LEDs、 4 pushbuttons、 8 slide switches
・4-digit seven-segment display
・PS/2 port
・8-bit VGA port
・USB2 full-speed port for FPGA configuration and data transfers (using Adept 2.0 software available as a free download)
・Four 6-pin headers for user I/Os、 and attaching Digilent Pmod™ accessory circuit boards