Grove

検索結果 116件中150件目
並び替え:
  • 1個
    ¥9,000(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥1,200(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONHave you ever been bothered for detecting simple collisions with complex algorithm with an acceleration sensor? The collision sensor is here to simplify the process,. It's also omni directional, stable, and sensitive. FeaturesWide power supply range DC3.3V to 5VGrove moduleHigh sensitiveRoHS/WEEE lead-free compliantDocumentshttp://wiki.seeedstudio.com/wiki/Grove_-_Collision_Sensor
  • 1個
    ¥2,045(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥860(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONGrove- Piezo Vibration Sensor is suitable for measurements of flexibility, vibration, impact and touch. The module is based on PZT film sensor LDT0-028. When the sensor moves back and forth, a certain voltage will be created by the voltage comparator inside of it.Therefore, outputs high & low levels. In spite of the fact that it has a high receptivity for strong impacts, a wide dynamic range (0.001Hz~1000MHz) also guarantees an excellent measuring performance. Finally, you can adjust its sensitivity by adjusting the potentiometer with a screw.FeaturesStandard grove socketWide dynamic range:0.001Hz~1000MHzAdjustable sensitivityHigh receptivity for strong impactApplicationsVibration Sensing in Washing MachineLow Power Wakeup SwitchLow Cost Vibration SensingCar AlarmsBody MovementSecurity SystemsDocumentshttp://wiki.seeedstudio.com/wiki/Grove-_Piezo_Vibration_Sensor
  • 1個
    ¥790(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONThis IR Distance Interrupter features a high-sensitivity RFR-359F photoreflector to perform distance detection function. The photoreflector consists of a GaAs infared light emitting diode and a silicon planar phototransistor. When the infrared light emitted by the emitter gets reflected on a surface that blocked it, the phototransistor can pick up the signal for distance calculation. This module is panel mounted so that you can easily implement it on the surface of robots or other projects without wiring clutter. Also a potentiometer for adjustment and an indicator LED are arranged on the back for easy and clear use.FeaturesHigh sensitivity photoreflectorLightweight and compactPanel mount design for clean and tidy implementationClear HID design: adjustment potentiometer and indicator LEDApplication IdeasWanderer robotsRPM gaugesApproximation detection
  • 1個
    ¥1,990(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    ●Grove interface compatible●Wide supply voltage range: 2.5V?7VThe 80cm Infrared Proximity Sensor is a General Purpose Type Distance Measuring Sensors、 this sensor takes a continuous distance reading and returns a corresponding analog voltage with a range of 10cm (4") to 80cm (30"). Can be used in TVs、personal computers 、cars and so on.【Interface】This sensor is quite small and use a tiny connector called the Japan Solderless Terminal (JST) connector. These connectors have three wires: ground、 vcc、 and the output. Because the sensor fire continuously and don't need any clocking to initiate a reading、 it is easy to interface with any microcontroller. for the seeeduino、 the wire convert the 3-wire to 4-wire 、to compatible with the twig interface of Grove .
  • 1個
    ¥960(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥1,320(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONThis Grove-Infrared temperature sensor is a non-contact temperature measure model.The sensor is composed of 116 elements of thermocouple in series on a floating micro-membrane having an active diameter of 545μm and with blacken surface to absorb the incident thermal infrared radiation, which induces a voltage response at output terminals.FEATURES・ Grove compatible interface・ Wide supply voltage range: 3V~5V・ Zero drift amplify current・ Power consumption: less than 0.6mW・ Temperature measure range: -10~100°C・ Measure accuracy: ±2°C・ Nominal measure distance: 9CM・ 2.0cm x 4.0cm Grove moduleApplication Ideas・ Motion sensor・ Thief-guarding System・ Switch・ Industrial automation・ Body distance check
  • 1個
    ¥790(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONThe Grove - Loudness Sensor is designed to detect the loudness of environmental sound. Based on amplifier LM2904 and a built-in microphone, it amplifies and filters the high frequency signal that received from the microphone, and outputs a positive envelop. This will make for Arduino’s signal acquisition. The output value depends on the level of sound input. In order to avoid unnecessary signal disturbances, input signal will go through two times’ filtering inside the module. Lastly, there is a screw potentiometer that enables manual adjustments to the output gain. FeaturesGrove compatible interfaceWide supply voltage rangeBuilt-in signal filteringGain adjustable via screw potentiometerSpecificationsItemMinTypicalMaxUnitVoltage3.5510VDCWorking Frequency50-20,000HZSensitivity-48-66dBSignal-to-noise Ratio>58dBOutput Signal rangeDigital Signal (0-1023)/Documentshttp://wiki.seeedstudio.com/wiki/Grove_-_Loudness_Sensor
  • 1個
    ¥13,320(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONThe Grove - CO2 Sensor module is infrared CO2 sensor high sensitivity and high resolution. Infrared CO2 sensor MH-Z16 Is a general-purpose, small sensors , the use of non-dispersive infrared (NDIR) Present in the principle of the air CO2 Detect , with good selectivity, oxygen- dependent , long life, built-in temperature sensor, temperature compensation ,with UART output , easy to use. It can be widely used in HVAC and indoor air quality monitoring , industrial process monitoring and security , agriculture and livestock production process monitoring.SPECIFICATION・Measuring the range of 0-2000 parts per million (PPM)・Resolution of 1 PPM 0-2000 parts per million (PPM)・Accuracy of 200 PPM・A Warm - up time 3 minutes・Response Time・Operating temperature 0 to 50℃・Operating Humidity 0% ~ 90% RH・Storage temperature - 20-60℃・Operating Voltage4.5 V to 6 V DC・The Current maximum Current of less than 100 ma, the average Current of less than 50 ma・Output mode UARTDOCUMENTShttp://wiki.seeedstudio.com/wiki/Grove_-_CO2_SensorNOTEThe sensor value only reflects the approximated trend of gas concentration in a permissible error range, it DOES NOT represents the exact gas concentration. The detection of certain components in the air usually requires a more precise and costly instrument, which can not be done with a single gas sensor. If your projects aims to obtain the gas concentration at a very precise level, then we do not recommend this gas sensor.
  • 1個
    ¥2,840(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONGrove - NFC Tag is a highly integrated Near Field Communication Tag module,this module is I2C interface,which base on M24LR64E-R,M24LR64E-R have a 64-bit unique identifier and 64 -Kbit EEPROM.Grove - NFC Tag attach an independent PCB antenna which can easily stretch out of any enclosure you use, leaving more room for you to design the exterior of your project.SPECIFICATION・Working Voltage:5V or 3V3・Working Current・2CM max effective range・Serve for contactless communication at 13.56MHz・ISO 15693 and ISO 18000-3 mode 1 compatible・64-bit unique identifier (UID)・Read Block & Write (32-bit blocks)・Grove I2C InterfaceDOCUMENTShttp://wiki.seeedstudio.com/wiki/Grove_-_NFC_Tag
  • 1個
    ¥1,340(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONAn electromagnet is a type of magnet in which the magnetic field is produced by electric current. An electric current flowing in a wire creates a magnetic field around the wire, due to Ampere's law(see drawing below). To concentrate the magnetic field, in an electromagnet the wire is wound into a coil with many turns of wire lying side by side. The magnetic field of all the turns of wire passes through the center of the coil, creating a strong magnetic field there. Grove - Electromagnet can shuck 1KG weight and hold on. it easy to use, to learn electromagnet principle.FeaturesGrove shape 1KG peak suction Low standby currentSpecificationWorking Voltage :DC 5V Working Current : 400mAStandby current : 200uA Load Weight: 1KGDocuments
  • 1個
    ¥1,540(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥800(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥2,380(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥1,320(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONThe sensor is designed for indoor air quality testing. The main gas detected is carbon monoxide, alcohol, acetone, thinner, formaldehyde and other slightly toxic gases. It is compatible with 5V and 3.3V power supply.FEATURES・Low power consumption・High sensitivity・Tiny outline・Responsive to a wide scope of target gases・Cost efficient・Durable・Compatible with 5V and 3.3VSPECIFICATION・Sensor: Winsen MP503・Power: 5V or 3.3V・Dimension: 40x20mmDOCUMENTShttp://wiki.seeedstudio.com/wiki/Grove_-_Air_Quality_Sensor_v1.3
  • 1個
    ¥2,380(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥5,320(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥2,280(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    The Grove 6 Axis Accelerometer&Compass v2 has 3 magnetic field channels and 3 acceleration channels、 and 16-bit data output. It can be used easy with micro controller via I2C or SPI port.  This sensor can be configured to generate an interrupt signal for free-fall、 motion detection and magnetic field detection. Features: SPI / I2C interfacesProgrammable interrupt Wide Full Scale Range   ±2/±4/±8/±12 gauss magnetic full scale   ±2/±4/±6/±8/±16g acceleration full scalePower-down mode / low-power mode Specification:    Working Voltage: 3.3V - 5V    Selectable I2C address    Low Power    Control Mode: I2C / SPI    Operating Temperature:-40 ~ +85°C
  • 1個
    ¥3,340(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥1,810(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONThe sensor on Grove - Gesture is PAJ7620U2 that integrates gesture recognition function with general I2C interface into a single chip. It can recognize 9 gestures including move up, move down, move left, move right, etc with a simple swipe of your hand.We can utilize the gesture to adjust the sound volume, control a robot. Or we can make a remote-control unit, which is able to operate many devices at the same time via a gesture sensor. FEATURES・19 gesture recognition・1Built-in proximity detection・1Various main boards support: Arduino UNO/Seeeduino/Arduino Mega2560PART LIST・11x PCBA-Grove - Gesture・11x 26AWG Grove Cable;SA206120099ASPECIFICATION・1Interface:IIC・113 gesture recognition・1Operating Power:5V・1Dimensions:20*20mm・1Sensor: PAJ7620U2・1Detecting range: 5 ? 15cm・1Ambient light immunity: DOCUMENTShttp://wiki.seeedstudio.com/wiki/Grove_-_Gesture_v1.0
  • 1個
    ¥2,380(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    Grove - Temperature&Humidity Sensor (HDC1000) utilizes a HDC1000 sensor、 which was designed by Texas Instruments. It is a digital humidity sensor with integrated temperature sensor that provides excellent measurement accuracy at very low power. The device measures humidity based on a novel capacitive sensor. The humidity and temperature sensors are factory calibrated. The innovative WLCSP (Wafer Level Chip Scale Package) simplifies board design with the use of an ultra-compact package. The sensing element of the HDC1000 is placed on the bottom part of the device、 which makes the HDC1000 more robust against dirt、 dust、 and other environmental contaminants. The HDC1000 is functional within the full 40°C to +125°C temperature range、 and 0-100% RH range.Features:    Grove connector compatible    IIC Interface    Low Power    Wide operating voltage range    I2C Serial Bus Address ConfigurationPart list:    1*PCBA-Grove - Temperature&Humidity Sensor(HDC1000);    1*26AWG Grove Cable; SA206120099A.Specification:    Supple Voltage:3~5Vdc;    Working Current:0.12~90uA;    Relative humidity accuracy:±3%RH;    Relative humidity operating range:0~100%RH;    Temperature accuracy:±0.2℃;    Temperature range:-40~125℃;    Operating temperature:-20~85℃    Dimension:40*20mm.
  • 1個
    ¥4,480(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    Grove Multichannel Gas sensor is a environment detecting sensor with a built in MiCS-6814 which can detect many unhealthful gases、 and three gases can be measured simultaneously due to its three channels、 so it can help you to monitor the concentration which more than one gas.  This sensor is belong to Grove system、 and you can plug it onto the Base shield and work with Arduino directly without any jumper wires. The interface of it is I2C、 so plug it onto the I2C port of Base shield、 then you can start to work it. Features:    Three fully independent sensing elements on one package    Built with ATmega168PA    I2C interface with programmable address    Heating power can be shut down for low power    Detectable gases:Carbon monoxide (CO) 、 Nitrogen dioxide (NO2) 、 Hydrogen (H2) 、 Ammonia (NH3) 、 Methane (CH4) 、 etc.Specification:    Voltage: 3.1~ 5.25V    Ripple(@Max Power):80~100mV    Max Heating Power: 88mW    Max Power: 150mW    ADC Precision : 10Bits    I2C Rate: 100kHz    VIL(@I2C): -0.5~0.99V    VIH(@I2C): 2.31~5.2VPart List:     1 x Grove Multichannel Gas Sensor    1 x 26AWG Grove Cable
  • 1個
    ¥1,380(税抜)
    10個から購入可能
    10個単位で購入可能
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥1,580(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    Grove - Water Atomization is a perfect module for you to develop an atomizer or an atomizer module in your applications easily. With just a few simple steps、 you can prototype an atomizer. It has Grove interface which makes it easy to be integrated into plenty of applications. A humidifier is a basic device it can be built with、 you can develop more advanced and interesting projects with digital scent technology and any other situations in which atomization required.Features:    Heated with ultrasound.    Easy to prototype.    Well applied to vast projects.    For various interesting、 smart and fashionable applications.Application ideas:    Humidifier.    Scent emitter in different situations.    For smart-house applications.Specification:Operating voltage:5.0V(DC)ripple(at Max power:100 mVMax power:2Wpeak output voltage:65±5VOperating frequency:105±5kHzChip:ETA1617、NE555
  • 1個
    ¥2,780(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    If you need a mini controller for your robot、 This product will be your type. We have developed a product called Grove Mini Track ball. As you can see、 on this product、 there is a mini track ball here、 you can feel free to rotate the ball horizontally and vertically from any angle. There are 5 axes here、 up down left right and press down. As you move the ball、 you will get the the values from these 5 axes and the values will be changed according to the direction and speed you move the ball.With the STM32F103C8T6 and AN48841B chip inside、 you can turn plenty of your ideas into real things. It is also standardized with Grove interface which will save you a lot of work in the process of prototyping.Have fun !Features    360° and Quick Detection.    Translucent Click Button.    Standardized with Grove Interface.    Powerful MCU to Enrich Your Applications.Specification    Operating Voltage: 3.3V~5.5V (typical at 5V)    Operating Current: 28 mA (Maximum Operating Current: 40 mA)    MCU Frequency: 64 MHz    Operating Frequency: 105±5kHz    Hall Effect Filed Strength Range: |0.5| ~ |8| mT
  • 1個
    ¥5,980(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    特徴●MSRP: USD 39●Processor: AM3358 1GHz ARM® Cortex-A8●512MB DDR3 RAM●4GB 8-bit eMMC on-board flash storage●3D graphics accelerator●NEON floating-point accelerator●2x PRU 32-bit microcontrollers●USB client for power & communications●USB host●Ethernet●2x46 pin headers●2xGrove connectors
  • 1個
    ¥3,430(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥4,380(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    The 96Boards Sensors Mezzanine adapter makes it simple and easy to connect sensors and devices to any 96Boards-compatible base board. With it you can connect your favourite Grove modules and Arduino compatible shields and interface to software running on the 96Boards baseboard. It provides everything you need to start experimenting and prototyping on the 96Boards platform.On the board you will find sockets for 18 Grove modules、 an Arduino-compatible shield socket、 and two SPI headers. It also includes an ATMega328 microcontroller which can be programmed from the Arduino IDE and will run most Arduino UNO sketches unchanged. The shield connector and 10 of the Grove sockets are controlled by the microcontroller、 while the remaining 8 Grove sockets are controlled directly by the baseboard. This makes it a flexible prototyping platform which supports both direct control of devices from application software、 and offload to a microcontroller. It also provides a USB-UART interface to access the baseboard’s serial console.The Sensors board attached on top of a 96Boards CE or EE edition board using the 40pin low-speed expansion connector.Please note: A 96Boards baseboard is not included.This board has been tested and works with the Qualcomm Dragonboard 410c and the LeMaker HiKey boards.Features    Integrated ATMEGA328p microcontroller (Arduino compatible)    18 Grove connectors        http://www.seeedstudio.com/wiki/Grove_System        5x baseboard GPIO ports        5x I2C ports (1 for baseboard、 2 for microcontroller)        5 digital ports (for microcontroller)        3x analog ports (for microcontroller)    2x SPI connectors (1 to baseboard、 1 to microcontroller)    Arduino UNO compatible shield connectors    LED: Power、 Reset、 2x baseboard GPIO、 1x microcontroller IO    UART interface between baseboard and microcontroller    USB-UART connector for baseboard console and controlPart List1x 96Boards Sensors Board4x M2.5 8mm nylon spacer4x M2.5 nylon screw
  • 1個
    ¥4,670(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONGrovePi+ is a system with 15 Grove 4-pin interfaces that brings Grove sensors to the Raspberry Pi. It is the newest version compatible with Raspberry model B/B+ and A+ perfectly.GrovePi+ is an easy-to-use and modular system for hardware hacking with the Raspberry Pi, no need for soldering or breadboards: plug in your Grove sensors and start programming directly. Grove is an easy to use collection of more than 100 inexpensive plug-and-play modules that sense and control the physical world. By connecting Grove Sensors to the Raspberry Pi, it empowers your Pi in the physical world. With hundreds of sensors to choose from Grove families, the possibilities for interaction are endless.NOTE: The Raspberry Pi board is not included.DOCUMENTShttp://wiki.seeedstudio.com/wiki/GrovePi+
  • 1個
    ¥650(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONThe Grove - DMX512 is a adapter from Grove interface to DMX512 interface(industry standard EIA-485 interface. The module is based on SN75176 chip which can balance transmission lines and meet ANSI Standard EIA-485 interface. Now It is convenience to control stage lighting and DMX512 console for Arduino.FeaturesGrove Interface and standard EIA-485 interfaceEasy to usestrong practicabilityDocumentshttp://wiki.seeedstudio.com/wiki/Grove_-_DMX512
  • 1個
    ¥3,980(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    Grove Solid State Relay is a non-contact electronic switch module that has relay features. Based on S208T02、 it has a maximum output of 250VAC/4A、 with a switching speed less than 10ms. This module is equipped with acrylic base and a 3D-printed protection insulation shield、 for user’s safety. The featured LED indicates that the relay is on. It can be widely used in various areas such as computer peripheral interfaces、 temperature/speed light adjustment、 servo control、 petrochemical、 medical instrumentations、 financial devices、 coal、 meters、 traffic signals、 etc.  Features    Compatible with both 3.3V and 5V control level    Low switching latency(10ms)    LED on-state indicator    Featured radiator provide better stability    Acrylic base and insulation paper increase safety performance     Grove compatible
  • 1個
    ¥580(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONThe Grove-Dry-Reed Relay is a relay module which works through magnetizing the vibration reed via the current in the coils. Compared to electromagnetic relays, the contacts completely sealed is the biggest feature of the Dry-Reed Relay. Besides, it features simplicity in construct, compactness, fast speed and long life, which make it widely applied in many fields such as microelectronic detection, Automatic Control etc.FeaturesGrove InterfaceCompactSwitch fasterHigh sensitivityGood stabilityLong contact lifeContact fully sealedDocumentshttp://wiki.seeedstudio.com/wiki/Grove_-_Dry-Reed_Relay
  • 1個
    ¥1,990(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥2,660(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONGrove - Recorder is based on ISD1820P, which can record 8~20 sec by set resistor and cycle play. It can offers true single-chip voice recording, no-volatile storage. Grove - Recorder is 100K and the total 10s for Recorder. This module is very easy to control, which can direct control by push button on board or by microcontroller. FeaturesGrove connector Lower power consumption Non-volatile storage User-friendly replacing a single resistor to change sample rate add a resistor to set play cycle modePackage IncludeGrove - Recorder Speakergrove 20cm cableDocumentshttp://wiki.seeedstudio.com/wiki/Grove_-_Recorder
  • 1個
    ¥1,050(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥3,050(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥1,180(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    Mega Shield is a extension board for Arduino Mega and Google ADK. We have standardized all the connectors into 4 pins(Signal 1、Singal 2、VCC and GND) 2mm connectors and keep some of the 3pin(Signal、 VCC and GND ) 2.54mm headers for Servo and Electronic Bricks 、 which simplify the wiring of electronics projects. The 4pins buckled connectors also make the wiring situation more stable. The Mega Shield includes Digital 0 - 21 and Anolog 0 - 15; We abandon Digital 22 - 53 for easily installing Mega Shield with Xduino Mega/Google ADK. Features    Arduino Mega1280/2560 compatible    Grove compatible    Google ADK compatible
  • 1個
    ¥480(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    Grove - Mouser Encoder is mechanical incremental rotary encoder (A、 B channel) with feedback of direction and speed[1]. It features standard Grove interface that will save your lots of work in wiring and programming. Also、 it is well adapted to heavy duty and a harsh environment. This product can be applied in toys、 robots、 and consumer input devices.Note that the rotating speed is designed to be less 1000 rad/min(radian per minute).Features:    Versatile for different environment.    Well adapted for heavy duty and harsh environment.    With detents and a nice feel.    Standard Grove interface for easier programming and wiring.    Accurate and reliable.Specification:Min.TypicalMax.Operating voltage(V)3.35.5Operating current(mA)1013Duty(constant speed)50%Phase difference(constant speed)π/4Pulse per circle12
  • 1個
    ¥1,180(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    Grove Base Shield for Photon is an expansion board which incorporated the standard Grove interfaces to let you build more powerful and intelligent applications with richer and cost-effective Grove functional modules. It gets three digital ports、 two analog ports、 two I2C ports and one UART port. It’s a plug-and-play shield designed to accelerate prototyping dramatically.Features    Compatible with Photon    Standard Grove interfaces to connect to a large family of Grove sensors and actuators    I2C、 UART ports integratedSpecification    Grove Ports: 3 digital ports、 2 analog ports、 2 I2C ports and 1 UART port.    Dimensions: 53 × 53 mm    Weight: 18g
  • 1個
    ¥780(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DescriptionGrove Breakout for LinkItTM Smart 7688 Duo is a Grove port integrated and a feature expansion board for LinkItTM Smart 7688 Duo development board. This breakout board will save a lot of work for quicker prototyping、 especially for novices through simplified wiring procedure. So it will help a beginner get a quick start. It supports serial buses like I2C、 UART and provides access to reserved original pins of LinkItTM Smart 7688 Duo.LinkIt Smart 7688 Duo(a compact controller board) is an open development board、 based on the OpenWrt Linux distribution、 MT7688 and ATmega32u4. The board is designed especially to enable the prototyping of Rich Application IoT devices for smart house.FeaturesGrove interfaces: I2C × 3、 Analog× 3、 Digital× 6Specification    Input voltage: 5.0V(With USB Power port)    Operating voltage: 3.3V    Debug pins conect with MT7688    Other pins connect with ATmega32U4.
  • 1個
    ¥2,190(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥580(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    Grove LED Bar is comprised of a 10 segment LED gauge bar and an MY9221 LED controlling chip. It can be used as a indicator for remaining battery life、 voltage、 water level、 music volume or other values that require a gradient display. There are 10 LED bars in the LED bar graph: one red、 one yellow、 one light green、 and the rest green. Demo code is available to get you up and running quickly. It lights up the LEDs sequentially from red to green、 so the entire bar graph is lit up in the end. Want to go further Go ahead and code your own effect. Features:    Each LED segment can be controlled individually via code;    Grove module;    Plug-and-play;    Can be cascaded for a larger display;    Flexible power option、 supports 3-5.5DC;    Available demo code;
  • 1個
    ¥250(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONA general purpose LED module in Grove form factor, available in different colors.The ingenious PCB design enables you to bend the LED to any position you want, which makes it easy to use it standalone, horizontal or Panel Mount(from left to right in below pics)SpecificationStandard Grove connectorOperate voltage: 3.3v/5vEmitting Color: WhiteDocumentshttp://wiki.seeedstudio.com/wiki/Grove_-_LED
  • 1個
    ¥2,000(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    ●Dot Matrix: 96 x 96 Pixels.●Color: Grayscale Display (16 Gray shades).●Supports both Normal and Inverse Color Display.●Supports Continuous Horizontal Scrolling.●Grove compatible 4pin I2C connector.●Works with both 5V and 3.3V logic MCUs.●Interface: I2C.●Wide range of operating temperature: -40°C 〜 7°C.Grove - OLED 0.96'' is a 16 color grayscale 96×96 dot matrix OLED display module with Grove compatible 4pin I2C interface.Grove - OLED 0.96" is constructed with 96 x 96 dot matrix OLED module ([ LY120])and SSD1327 driver IC. The characteristics of this display module are high brightness、 self-emission、 high contrast ratio、 slim / thin outline、 wide viewing angle、 wide temperature range、 and low power consumption.【Application Ideas】- Graphic display adapter for Seeeduino and Arduino using Grove stem board .- Display adapter for any 5V or 3.3V MCU which supports I?C interface.- Can be used with mbed microcontroller.
  • 1個
    ¥1,340(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥980(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    Grove Base Shield for NodeMCU is an extension board that help you to play with Grove sensors on an ESP8266 WIFI development kit which called NodeMCU.You can run Grove sensor with Lua script language in the NodeMCU firmware.Features:    Compatible with all Grove modules    5 Digital connectors (D3-D8)    1 Analog connectors (A0)    2 I2C sockets    NO SPI socket    UART/D9-D10 connector    Power indicator LED
  • 1個
    ¥1,780(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    The Grove Mini I2C motor driver is a very tiny motor driver with I2C interface、 and it includes two motor driver chips - DRV8830、 which helps you control two DC motors or winding of stepper motors on a small board simultaneously. With four solderable pads back of the board、 you can change the I2C address of each motor driver easily. Especially、 with the onboard protection circuit、 the max limitation current of each channel can be adjusted from 0.2A to 1A、 you can set a proper limitation current according to the load.It can be used for battery-powered toys、 printers、 and other low-voltage or battery-powered motion control applications due to the features.Also、 Grove Mini I2C motor driver is belong to Grove System、 you can plug it onto the Base shield and work with Arduino directly without any jumper wires.Features:    Tiny driver board    Two motor driver channels    Working Voltage : 2.75v 6.8v    Changeable max limitation current    Grove compatible    I2C interface    Easy to use
  • 1個
    ¥2,880(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    Grove - Haptic motor is a Grove module integrated with DRV2605L which will give your project more feelings. This motor is specially designed for various effects、 such as to ramp the vibration level up and down、 for wearable and IoT devices. Right we have developed an easy-to-use library which can simulate 123 kinds of vibrating modes in total and this will make your prototyping very quickly. Also、 you can develop more advanced functions with the driver DRV2605L which improves actuator performance in terms of acceleration consistency、 starting time、 and brake time and is accessible through a shared I2C compatible bus or PWM input signal.Features:    More vibration effects.    Facilitate the process of prototyping.    Easy-to-use library with 123 kinds of vibrating modes.    Powerful driver to implant more advanced functions.Specification:Operating voltage3.3〜5.0 VRipples (at maximum power)50〜100 mVMax power750 mWI2C speed100 kHzVibration effects123 typesDriverDRV2605LPortI2CDefault I2C Address0x5A
  • 1個
    ¥1,580(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    Grove - 6-Axis Accelerometer&Gyroscope is a cost-effective Grove sensor integrated with a 3-axis digital accelerometer and a 3-axis digital gyroscope.With a serious low power consumption digital chip LSM6DS3 and power supply regulator inside、 it features high sensitivity、 green tech and low noise interference. It can be configured to different sensitivity levels of acceleration and different angular rate measurement range. Provided with detailed SDK、 it can make the prototyping process quicker and easier.This product can be used for different applications for tilt、 motion、 and tap sensing、 such as robotics、 IoT devices and consumer electronic devices.Features:    Grove interfaced and cost-effective.    Digital-output for 6 DOF motion data.    ±2/±4/±8/±16 g full scale leaner acceleration sensing range for various environment.    ±125、 ±245、 ±500、 ±1000、 ±2000 degree per seconds(dps) for angular rate measurement range make it versatile.    Detailed SDK for easier programming.    Regulated power supply for reliable data to be collected.    Programmed interrupts for different event.    8 kbyte data buffering.Specification:Analog supply voltage: 5V/3.3V(DC)Power consumption: 0.9 mA in combo normal mode and 1.25 mA in combo high-performance mode up to 1.6 kHzLinear acceleration measurement range ±2/±4/±8/±16 g full scale (typical value)Angular rate measurement range ±125、 ±245、 ±500、 ±1000、 ±2000 dps(typical value)Linear acceleration sensitivity 0.061(FS = ±2)、 0.122(FS = ±4)、 0.244(FS = ±8)、 0.488(FS = ±16) mg/LSBAngular rate sensitivity 4.375(FS = ±125)、 8.75(FS = ±245)、 17.50(FS = ±500)、 35(FS = ±1000)、 70(FS = ±2000)Platform Seeeduino/Arduino Rasberry Pi LinkIt One BeagleboneSupported status Supported Supported Supported SupportedNotes If no version number is not represented for a specific platform、 it means this product support all versions within this platform. But you will need additional corresponding Grove shield board such as Grove - Base shield v2.
並び替え:
検索結果: 150 件 / 全 116