Raspberry Pi

検索結果 74件中150件目
並び替え:
  • 1個
    ¥536(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥6,400(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    Make your Raspberry Pi into an Astro Pi with the Sense HAT - Pressure、 humidity、 temperature and orientation sensors combined with a beautiful 8x8 LED matrix!Attach the HAT to your Pi's GPIO pins and you can use the integrated circuit based sensors for many different types of experiments、 applications、 and even games.The sensors enable you to read:    Orientation (yaw、 pitch & roll) via an accelerometer、 3D gyroscope and magnetometer    Pressure    Humidity    TemperatureThe Sense HAT supports a whole host of projects for the Raspberry Pi、 it can measure how fast is the Pi itself travelling (i.e. measure your speed)、 how hot is it how humid is it (air humidity)、 which direction is the Raspberry Pi facingThe LED Matrix enables you to display the data from the various sensors、 it can show you which way is geomagnetic North by programming a compass using the magnetometer、 or simply be used to play games like Tetris、 Pong and Snake with the joystick. The joystick can also be used to enable a human user to interact with the programs running on the Raspberry Pi Sense HAT.Writing programs for the Sense HAT is very simple、 with a Python library available to get started quickly and easily. For a truly out of world projects check out the AstroPi website http://astro-pi.org/、 containing a host of ideas and instructions for using the Raspberry Pi and Sense HAT on the International Space Station (ISS).This kit comes with the Sense HAT、 4x M2.5 mounting posts and 8x M2.5 screws to securely mount your Sense HAT on your Raspberry Pi.Getting Started:Connect your Sense HAT to the Raspberry Pi via the 40 GPIO Pins.You will then need to install the software:Open up a terminal and run the following command:wget -O - http://www.raspberrypi.org/files/astro-pi/astro-pi-install.sh --no-check-certificate | bash(This will take approximately 5 mins to run on the Raspberry Pi 2 Model B、 and approximately 20 minutes on earlier models of the Raspberry Pi)When the install has finished you will need to reboot your Raspberry PiFeatures:    Gyroscope angular rate sensor: +/-245/500/2000dps    Accelerometer - Linear acceleration sensor: +/-2/4/8/16 g    Magnetometer - Magnetic Sensor: +/- 4/8/12/16 gauss    Barometer: 260 1260 hPa absolute range (accuracy depends on the temperature and pressure、 +/- 0.1 hPa under normal conditions)    Temperature sensor (Temperature accurate to +/- 2 degC in the 0-65 degC range)    Relative Humidity sensor (accurate to +/- 4.5% in the 20-80%rH range、 accurate to +/- 0.5 degC in 15-40 degC range)    8x8 LED matrix display    Small 5 button joystickPart List:    1 x Sense HAT
  • 1個
    ¥5,280(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    Alamode is an Arduino compatible development board that extends that lovin' feeling to the Raspberry Pi.  With Raspberry Pi ‘A la Mode、 you can write a program on the Pi in any language you want、 to control or monitor your Arduino application、 making Internet integration and control super easy. In addition you can even program the AlaMode directly from the Pi.  Or、 turning things around、 think of Raspberry Pi as a highly capable ethernet and display shield for the Alamode! Features    Fully compatible with Arduino、 including Arduino shields    Plugs in to Raspberry-Pi GPIO header    Voltage safe Bidirectional translator automagically converts between 3.3V for Raspberry-Pi and 5V for Arduino    Same form factor as Raspberry-Pi    5V Micro-USB socket for Power In    Servo Headers with alongwith GND and 5V headers for easy connection of 3 wire servos    Micro-SD card for data storage and Arduino use    High precision RTC chip with battery backup (CR1632 battery not included). Possible to set time on Raspberry-Pi without Internet connection    Convenient headers for FTDI、 ICSP、 Analog Reference (3V3 or 5V0)、 GPS module、    Can be powered independently、 or via the Raspberry-Pi 5V supply    Compatible with Raspberry Pi A+、B、B+.
  • 1個
    ¥1,700(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥3,530(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONThe Relay Shield utilizes four high quality relays and provides NO/NC interfaces that control the load of high current. Which means it could be a nice solution for controlling devices that couldn’t be directly controlled by IIC bus. Standardized shield form factor enables smoothly connection with the Raspberry Pi . The shield also has four dynamic indicators show the on/off state of each relay. Features:Raspberry Pi compatibleInterface:IIC , Three hardware SW1 (1, 2, 3) select the fixed I2C-bus addressRelay screw terminalsStandardized shield shape and designLED working status indicators for each relayCOM, NO (Normally Open), and NC (Normally Closed) relay pins for each relayHigh quality relaysWorking status indicators for each relaySpecification: Compatible:Raspberry Pi ; Other main board via jumpers;Power supply:4.75~5.5V ;Max Switching Voltage:30VDC/250VAC;Max Switching Current:15A ;Frequency:1Hz;Dimensions:91.20 * 56.15*32mm;Documents:http://wiki.seeedstudio.com/wiki/Raspberry_Pi_Relay_Board_v1.0
  • 1個
    ¥1,700(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥7,430(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONRaspberry Pi Motor Driver Board v1.0 is based on the Freescale MC33932 dual H-Bridge Power IC, which can control inductive loads with currents up to 5.0A peak per single bridge. It lets you drive two DC motors with your Raspberry Pi B/B+/A+ and Pi 2 Model B, controlling the speed and direction of each one independently.Raspberry Pi Motor Driver Board v1.0 support a very wide range of input voltage from 6V~28V. otherwise ,the on board DC/DC converter support a very wide range of input voltage, and can provide a 5V power supply for the Raspberry Pi with 1000mA maximum current. So, you just need one power supply to drive the motors and power up the Raspberry Pi.Features:Operating Voltage: 6V ~ 28VDC/DC output: 5V 1000mA @ "5V" pinOutput Current(For Each Channel ): 2A (continuous operation) / 5A(peak)Output Duty Range: 0%~100%Output short-circuit protection (short to VPWR or GND)Over-current limiting (regulation) via internal constant-off-time PWMTemperature dependant current limit threshold reductionRaspberry Pi compatibleSpecification: Compatible:Raspberry Pi ; Other main board via jumpers;Power interface:DC Jack;Dimensions:91.20 * 56.15mm;Operating Voltage: 6V ~ 28VDocuments:http://wiki.seeedstudio.com/wiki/Raspberry_Pi_Motor_Driver_Board_v1.0
  • 1個
    ¥1,510(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥470(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONIntroduction :The GPIO Reference board is specifically designed for Raspberry Pi. The Raspberry Module B+ increased to 40 GPIO. It’s difficult to remember the order of the new GPIO and functions. So we make this GPIO Reference board , making the majority user of Raspberry Pi B+ easily identify GPIO .Compatible with Raspberry Pi A+,B+/2.
  • 1個
    ¥1,100(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONIntroduction:He Serial Por module is specifically designed for Raspberry Pi. The module use Maxim MAX232 chip and DB9 port. So the user don’t need to connect Dupont Line and that avoid wrong wiring. User can use this module to debug Raspberry Pi easily.Produce Features:Maxim MAX232 on chipDB9 portCompatible with Raspberry Pi A+,B,B+/2.Port:Raspberry Pi connection portDB9 portProduct Parameters:Working voltage: 5VTwo Drivers and Two ReceiversOperates Up To 120 kbit/sLow Supply Current . . . 8 mA TypicalTypical Application:Interface TranslationMultidrop RS-232 NetworksLow-Power Modems
  • 1個
    ¥1,580(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥8,000(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥24,580(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥7,366(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥5,330(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONFeatures:Designed for Raspberry Pi Model B/B+, easy to useCompatible with Raspberry Pi A+,B,B+/2.Supports Raspbian system, enables your system to:Play videos (supports multi formats, MP4 and so on)Take photos by touching (up to 17 camera modes)Support software keyboard (system interaction without keyboard/mouse)Package Contains:3.2inch RPi LCD (B) x 1RPi screws pack (2pcs) x 1DVD × 1interface:PIN NO.SYMBOLDESCRIPTION1, 173.3VPower positive (3.3V power input)2,45VPower positive (5V power input)3,5,7,8,10,22NCNC6,9,14,20,25GNDGround11TP_IRQTouch Panel interrupt, low level while the Touch Panel detects touching12KEY1Key13RSTReset15LCD_RSLCD instruction control, Instruction/Data Register selection16KEY2Key18KEY3Key19LCD_SI / TP_SISPI data input of LCD/Touch Panel21TP_SOSPI data output of Touch Panel23LCD_SCK / TP_SCKSPI clock of LCD/Touch Panel24LCD_CSLCD chip selection, low active26TP_CSTouch Panel chip selection, low activeKey Parameters:LCD TypeTFTLCD InterfaceSPITouch ScreenResistiveTouch Screen Controller XPT2046Colors65536BacklightLEDResolution320*240 (Pixel)Aspect Ratio4:03Power ConsumptionTBDBacklight CurrentTBDOperating Temp. (℃)TBD
  • 1個
    ¥4,980(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    あらゆるRaspberry Piコンピュータ又はComputeモジュールに接続し、HDビデオや静止画を作成できます。●高画質●優れたデータ機能●5メガピクセル固定フォーカス●1080p、720p60、VGA90に対応●Omnivision 5647センサ●固定パターンノイズやにじみなどを削減●露光制御、ホワイトバランス、輝度検出などの自動制御機能●植物や野生生物の撮影、夜間のセキュリティ用途に最適Raspberry Piへは基板上面にあるソケットとリボンケーブルを介して接続されます。【仕様】サイズ25mm x 20mm x 9mm重量3g
  • 1個
    ¥10,030(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONWhen you get your first Raspberry Pi B/B+/A+ single-board computer, you have to prepare a lot of peripheral devices, such as USB cable, SD card which must be installed OS, HDMI cable, etc. So, you may buy all devices online, and your time and money will be wasted. Quick Starter kit like a minimum system for Raspberry Pi B/B+/A+, it means all necessities such as peripheral devices will be included. Also, SD card preinstalled Raspbian OS that you can play your Minecraft out-of-box :)This kit has two versions, one is included Raspberry PI B+ board, another is not included. This kit consists of 7 devices (except Raspberry Pi B+), such as 5V 2.1A power adapter, USB cable with switch, etc. You can get full part list in Include section.Notice: Quick Starter Kit with Raspberry Pi includes Raspberry Pi B+. FEATURES・ Minimum kit to power up your Raspberry Pi B+・ Including 8GB SD Card preinstalled Raspbian OS・ Including micro USB cable with switch・ 5V, 2.1A power adapter with FCC/CE certificated・ Including simply, but clear guide・ Not include unneeded devicesSPECIFICATION・ Power Adapter certificated:FCC, CE・ American Standard Power Adapter・ Ethernet Cable length: 1 meter・ HDMI Cable length: 1 meter・ USB to TTL Cable length: 1 meter・ Power Adapter Output: 5V, 2.1A・ Xx mm Acrylic Enclosure・ Package size:74*134*202mm
  • 1個
    ¥7,530(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥1,382(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥1,230(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥15,050(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥370(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥1,240(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥4,400(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥2,860(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONThe all-new Pibow for the Raspberry Pi Model B+ redesigned with add-on boards in mind. The Model B+ Rainbow is a sleek, durable and attractive case crafted out of eight unique layers with a transparent top and base that leave your beautiful Pi visible inside. Each layer is laser-cut from colorful high-quality cast acrylic (or spruce in the case of the Timber) and once stacked they securely contain a Raspberry Pi Model B+ while leaving the primary ports, including the camera port, accessible.FEATURES・ Extra extension layer included・ Many add-on boards can now fit inside!・ Icons and cut outs moved to leave the lid clear・ Weighing only 92 grams the case is lightweight and ideal for mounting to any surface. No tools are required for assembly or disassembly.SPECIFICATION・ Now includes a free extension layer・ Clear top and base to leave Raspberry Pi visible・ Etched port markings and cable escapes・ Leaves primary ports accessible・ Lightweight high-quality layers・ Protects your Raspberry Pi
  • 1個
    ¥1,900(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONPibow Coupe is a slim, hackable and attractive case crafted out of four unique smoked layers with a transparent top and base that leave your beautiful Pi visible inside.Each layer is laser-cut from colourful high-quality cast acrylic and once stacked they securely contain a Raspberry Pi Model B+ while leaving the primary ports, including the camera port and GPIO, accessible.Weighing only 61 grams the case is lightweight and ideal for mounting to any surface. No tools are required for assembly or disassembly.FeaturesSimline profileIncludes GPIO cut-out with laser-etched pin labelsGreat for hacking and tinkering!Lush new hot-chilli red frosted acrylicSpecificationGPIO cut-out with etched pin labelsClear top and base to leave Raspberry Pi visibleEtched port markings and cable escapesLeaves primary ports accessibleLightweight high-quality smoked cast acrylicProtects your Raspberry Pi
  • 1個
    ¥7,150(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥800(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONThis is a T-type breakout kit used for extending the GPIO interface on Raspberry Pi B+ to breadboard. It helps you to make the connections between Raspberry Pi and breadboard become simple. Compatible with Raspberry Pi A+,B+/2.Corresponding InterfacePin1 - 3V3Pin2 - 5VPin3 - SDAPin4 - 5VPin5 - SCLPin6 - GNDPin7 - GPIO4Pin8 - TXDPin9 - GNDPin10 - RXDPin11 - GPIO17Pin12 - GPIO18Pin13 - GPIO27Pin14 - GNDPin15 - GPIO22Pin16 - GPIO23Pin17 - 3V3Pin18 - GPIO24Pin19 - SPIMOSIPin20 - GNDPin21 - SPIMISOPin22 - GPIO25Pin23 - SPISCLKPin24 - SPICS0Pin25 - GNDPin26 - SPICS1Pin27 - EEDATAPin28 - EECLKPin29 - GPIO5Pin30 - GNDPin31 - GPIO6Pin32 - GPIO12Pin33 - GPIO13Pin34 - GNDPin35 - GPIO19Pin36 - GPIO16Pin37 - GPIO26Pin38 - GPIO20Pin39 - GNDPin40 - GPIO21 Specificationwire length:19cmPCBA size:59*69*19mmPCBA color:BlackPin:40pin
  • 1個
    ¥1,400(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONThe acrylic case is used for raspberry pi B+/2, It’s made of acrylic sheet, Only 4 pieces sheets, in total. manufacture by laser cutting, CNC milling, and hot bending. Looks very compact and beautiful.FeaturesThe acrylic case is used for raspberry pi B+/2, it’s made of acrylic sheet, Looks very compact and beautiful.Specification98.5mm x 70mm x 35.5mm / 3.88" x 2.76" x 1.4"Working temperature: -20~70°CColors:Transparenthttp://www.seeedstudio.com/wiki/Raspberry_PI_B%2B_Case
  • 1個
    ¥1,040(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥670(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONIt is a good plastic box for Raspberry Pi, which can protect it with one of these snazzy plastic enclosures?. These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together.The enclosure provides slots to access the peripheral header, USB ports, Ethernet, SD card, HMDI, composite video, audio, CSI and JTAG connectors as well as feet and vents to ensure the board gets proper cooling and plus-shaped wall mounting slots. All of the status LEDs on the Pi are visible through the case thanks to light pipes embedded in the design. This is a really slick case and once you've gotten your hands on a Raspberry Pi, you'll want to snag one of these to put it in!Featuresmade with ABS plasticCompatible with Raspberry PiB+/2.equipped with the breather holesmooth surfaceEasy to fixedUnibody, esy to installColors: TransparentSpecificationCase size: 90x60x25mmrubber plastic non-slip mats x 4set screws x 4
  • 1個
    ¥670(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥670(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥140(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONThis is an aluminum heatsink kit used for cooling the chips on Raspberry Pi. Specification:Large plate: 14 x 14 x 6mmSmall plate: 8.8 x 8.8 x 5mm
  • 1個
    ¥1,080(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥390(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONIt is a good plastic box for Raspberry Pi, which can protect it with one of these snazzy plastic enclosures?. These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together.The enclosure provides slots to access the peripheral header, USB ports, Ethernet, SD card, HMDI, composite video, audio, CSI and JTAG connectors as well as feet and vents to ensure the board gets proper cooling and plus-shaped wall mounting slots. All of the status LEDs on the Pi are visible through the case thanks to light pipes embedded in the design. This is a really slick case and once you've gotten your hands on a Raspberry Pi, you'll want to snag one of these to put it in!Features3mm acrylicLight and easy to transportgood heat dispersionCompatible with Raspberry PiB+/2.SpecificationCase size: 95x65.5x34.5mm
  • 1個
    ¥100(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥1,960(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONThe Raspberry Pi GPIO Triple Expand Board converts the single GPIO header on the Raspberry Pi B+/A+ into three, and enables the addition of breakout boards, add-on boards or just about anything that's designed to connect on to a Raspberry Pi B+/A+ GPIO!FeaturesPlug & Play - Requires No Drivers or Set Up.Splits the Single GPIO Header into Three!Gives you three GPIO headers to plug in break out boards, add on boards etc.Compatible with Raspberry Pi A+,B+/2.
  • 1個
    ¥2,580(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥1,960(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥4,100(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥700(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONIt is a good plastic box for Raspberry Pi, which can protect it with one of these snazzy plastic enclosures? These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together.The enclosure provides slots to access the peripheral header, USB ports, Ethernet, SD card, HMDI, composite video, audio, CSI and JTAG connectors as well as feet and vents to ensure the board gets proper cooling and plus-shaped wall mounting slots. All of the status LEDs on the Pi are visible through the case thanks to light pipes embedded in the design. This is a really slick case and once you've gotten your hands on a Raspberry Pi, you'll want to snag one of these to put it in!FEATURES・ Made with ABS plastic・ B+ Size・ Equipped with the breather hole・ Smooth surface・ Easy to fixed・ Unibody, esy to install・ Colors: BlackSPECIFICATION・ Case size: 70x60x23mmPART LIST・ 1 x Raspberry pi A plus case ・ 4 x rubber plastic non-slip mats・ 4 x set screws
  • 1個
    ¥700(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONIt is a good plastic box for Raspberry Pi, which can protect it with one of these snazzy plastic enclosures? These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together.The enclosure provides slots to access the peripheral header, USB ports, Ethernet, SD card, HMDI, composite video, audio, CSI and JTAG connectors as well as feet and vents to ensure the board gets proper cooling and plus-shaped wall mounting slots. All of the status LEDs on the Pi are visible through the case thanks to light pipes embedded in the design. This is a really slick case and once you've gotten your hands on a Raspberry Pi, you'll want to snag one of these to put it in!FEATURES・ Made with ABS plastic・ B+ Size・ Equipped with the breather hole・ Smooth surface・ Easy to fixed・ Unibody, esy to install・ Colors: TransparentSPECIFICATION・ Case size: 70x60x23mmPART LIST・ 1 x Raspberry pi A plus case・ 4 x rubber plastic non-slip mats・ 4 x set screws
  • 1個
    ¥410(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONIt is a good plastic box for Raspberry Pi A Plus, which can protect it with one of these snazzy plastic enclosures?. These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together.The enclosure provides slots to access the peripheral header, USB ports, Ethernet, SD card, HMDI, composite video, audio, CSI and JTAG connectors as well as feet and vents to ensure the board gets proper cooling and plus-shaped wall mounting slots. All of the status LEDs on the Pi are visible through the case thanks to light pipes embedded in the design. This is a really slick case and once you've gotten your hands on a Raspberry Pi A Plus, you'll want to snag one of these to put it in!Features3mm acrylicLight and easy to transportgood heat dispersionSize: 74 x 66 x 29.5mmPart List1 x Acrylic set
  • 1個
    ¥420(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
  • 1個
    ¥2,880(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    A simple to use motor shield for the Raspberry Pi. This board is designed to simplify the process of making small roving robots using a Raspberry Pi.Features    Dual bi-directional motor control using TB6612FNG dual H-bridge    Dual open drain 2A MOSFET outputs    Socket for HC-SRo4 Rangfinder    Socket for 5V 12C Interface    Provides 5V regulated power to Raspberry Pi (efficient SMPS)    2 x user controllable LEDs    2 x header pins for switches    Reverse polarity protection    Open Source Python Software library    Screw terminals for motor connections    Compatible with Pi、 B+、 A+、 Pi2SpecificationElectrical CharacteristicsFor characteristics of the bi-directional motor driver outputs L and R see the TB6612FNG datasheet.ParameterValue(Units)Max Input voltage12 (V)Min Input voltage6 (V)Max current OC1 and OC22 (A)Max current I2C 5V supply100 (mA)Part List1 x RaspiRobot v3
  • 1個
    ¥8,500(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    The HiFiBerry Amp+ is a high-quality、 highly efficient Class-D power amplifier for the Raspberry Pi (newer models with 40 pin GPIO connector)、 that is mounted onto the Raspberry Pi to create a stereo audio system. The speakers just have to be connected directly、 which makes it an ideal module for multi-room audio installations.Usage recommendations    small and elegant music playback devices    home automation and multi-room audio systems    solutions that require high-quality sound but unobtrusive appearanceFeatures    Up to 25W output power    Capable of driving a pair of 4 Ohm speakers    Fully controllable from the Raspberry Pi    44.1kHz and 48kHz sample rates    Digital-analog conversion included、 no need for external DACs or sound cards    Fully digital sound path for optimal audio performance    Connects directly to the Raspberry Pi A+、 B+ and 2B、 no additional cables needed (Zero compatible after soldering the GPIO header)    Only one 12-18V external power supply needed for both AMP+ and the Raspberry Pi、 no need for USB power supply anymore    No soldering required、 the AMP+ is directly mounted on the Raspberry Pi A+/B+ in less than a minutePart List    1 x HiFiBerry DAC+ pro audio board    4 x M2.5x12mm spacers to mount on the Raspberry Pi
  • 1個
    ¥5,280(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    The HiFiBerry DAC+ standard is a high-resolution digital-to-analog converter for the Raspberry Pi (newer models with 40 pin GPIO connector). This is a special sound card for the Raspberry Pi、 optimized for one specific use case: the best audio playback quality.Usage recommendations    small and elegant high quality music playback devices    home automation and multi-room audio systemFeatures    Dedicated 192kHz/24bit high-quality Burr-Brown DAC with external low-jitter clock for best sound quality.    Hardware volume control. You can control the output volume using “alsamixer” or any application that supports ALSA mixer controls.    Connects directly to the Raspberry Pi、 no additional cables needed    No soldering、 comes as a pre-fabricated kit. You just plug it onto the Raspberry Pi、 it is conform to the Raspberry Pi hardware-attached-on-top (HAT) specification.    Compatible with Raspberry Pi models A+、 B+ and 2B (Zero when soldering GPIO header)    Directly powered from the Raspberry Pi、 no additional power supply    Ultra-low-noise voltage regulator for optimal audio performance    Comes with all components required to mount it. We include 4 M2.5x12mm spacers to fix the board onto the Raspberry Pi.Part List    1 x HiFiBerry DAC+ standard RCA audio board    4 x M2.5x12mm spacers to mount on the Raspberry Pi
  • 1個
    ¥1,080(税抜)
    メーカー名:
    Adafruit
    型番:
    納期:
    商品説明
  • 1個
    ¥3,780(税抜)
    メーカー名:
    SeeedStudio
    型番:
    納期:
    商品説明
    DESCRIPTIONThis TFT LCD is designed for RPI. As it is touch screen, you can design it for many things. FeaturesDesigned for Raspberry Pi Model B/B+, an ideal alternative solution for HDMI monitorCompatible with Raspberry Pi A+,B,B+/2.320×480 resolution, better displayConvenient Men-Machine interface for Raspberry Pi, combined with the portable power, DIY anywhere anytimeSupports Raspbian system, enables your system to:Play videos (supports multi formats, MP4 and so on)Take photos by touching (up to 17 camera modes)Support software keyboard (system interaction without keyboard/mouse)
並び替え:
検索結果: 150 件 / 全 74